PRESSURE COMPENSATING EMITTERS

Wade Rain Acu-Emitters are self-purging pressure compensating emitters which mount "on-line" to a polyethylene lateral. Automatic flushing at start-up and shut-down occurs at approximately 1 psi. A double-sided silicone diaphragn allows purging and delivers a constant discharge rate through a range of 10-60 psi. These emitters can be fitted with small diameter porting tubing to deliver water to a location away from the emitter. Maximum Recommended Working Pressure - 60 PSI. All Acu-emitters use .125" I.D. porting tubing.

MICRO-FLAPPER	PART	DESCRIPTION
	MF-1/2	Acu-emitter, pressure compensating, self-flushing, .187 barb inlet x 1/8" outlet barb, .50 GPH Red
	MF-3/4	Acu-emitter, pressure compensation, self-flushing, .187 barb inlet x 1/8" outlet barb, .75 GPH Gray
	MF-1	Acu-emitter, pressure compensating, self-flushing, .187 barb inlet x 1/8" outlet barb, 1 GPH Black
	MF-2	Acu-emitter, pressure compensating, self-flushing, .187 barb inlet x 1/8" outlet barb, 2 GPH Green

6 & 12-WAY PRESSURE COMPENSATING EMITTERS

Wade Rain 6-Way and 12-Way Acu-Emitters- Silicone diaphragm each outlet. One outlet only (per side) open. Snip open others as needed. Be sure "snipped" outlets ar fully open to prevent flow restriction. Flow rate shown on housing. Maximum Recommended Working Pressure - 60 PSI. All Acu-emitters use .125" I.D. porting tubing.

6-OUTLET MICRO-FLAPPER	PART	DESCRIPTION
	MF6-1/2	6-way Acu-emitter with .187 barb inlet x 1/8" outlet, self-flushing, .5 GPH per outlet, Red base
	MF6-1	6-way Acu-emitter with .187 barb inlet x 1/8" outlet, self-flushing, 1 GPH per outlet, Black base
	MF6-2	6-way emitter with .187 barb inlet x 1/8" outlet, self-flushing, 2 GPH per outlet, Green base
12-WAY ACU-EMITTER	DESCRIPTION	PART
	MF12-1/2	12-way Acu-emitter with .187 barb inlet x 1/8" outlet, self-flushing, .5 GPH per outlet, Red base
	MF12-1	12-way Acu-emitter with .187 barb inlet x 1/8" outlet, self-flushing, 1 GPH per outlet, Black base
	MF12-2	Multi-port emitter with .187 barb inlet x 1/8" outlet, self-flushing, 2 GPH per outlet, Green base

ACU-EMITTER PUNCH TOOLS

	PART	DESCRIPTION
	PQP125	Quick Punch- punches hole for 1/8" & 1/4" barb fittings. Handle inserts 1/4" connectors
	RP	Hand held punch prepares hole in polyethylene tubing for mounting of emitters, fittings, etc.
	MFIT	Black in color. Used to greatly assist in inserting the Acu-Emitter into polyethylene tubing.

TURBULENT FLOW EMITTERS

Wade Rain Turbulent Emitters utilize the turbulent-flow labyrinth method of energy dissipation to achieve prediction flow rates. This design includes relatively large flow paths which minimize clogging. Maximum Recommended Working Pressure - 40 PSI

CLIP-ON EMITTER	PART	DESCRIPTION
	CO1/2	Clip-on emitter, 1/4" barb inlet, .5 GPH - Red
	CO1	Clip-on emitter, 1/4" barb inlet, 1 GPH - Blue
	CO2	Clip-on emitter, 1/4" barb inlet, 2 GPH - Green
SCREW-ON EMITTER	PART	DESCRIPTION
	SO1/2	Screw-on emitter, screws into 125-185 tubing, .5 GPH- Red
	SO1	Screw-on emitter, screws into 125-185 tubing, 1 GPH- Blue
	SO2	Screw-on emitter, screws into 125-185 tubing, 2 GPH- Green